Poly Rove B4 Dual Cell DECT Base Station

A  Dual Cell DECT Base Station for use with the Poly Rove 30 and Poly Rove 40 Cordless IP Handsets

About the Poly Rove B4

The Poly Rove B4 is a Dual Cell DECT Base Station that is for use with the Poly Rove 30 and the Poly Rove 40 DECT IP Cordless Handsets. The B4 Base Station supports up to 30 Handsets and up to 8 simultaneous calls per Base Station. Its the ideal Multi-Cell solution for businesses that need a reliable cordless network system.

Providing a range of up to 50 metres indoors and up to 300 metres outdoors, the Poly B4 ensures that you are always reachable. The range can be extended with an additional Base Station or with the Poly Rove R8 Repeater.

The B4 supports Power over Ethernet (PoE), to get yor Base Station up and running a single network cable is all that is needed, if PoE isnt available the Poly B2 Base Station can be used with the included Power Supply Unit (PSU).

Features

• Up to 1000 SIP Regsitrations per System
• Up to 30 Handsets per Base Station
• Up to 8 Simultaneous Calls per Base Station
• Up to 1000 Handsets per System
• Up to 1000 SIP Registrations per System
• Up to 2000 Simultaneous Calls Per System
• Missed Call Notifications
• LED Indicator
• Do Not Disturb, Intercom
• Call Transfer, Hold, Pickup, Call Resume

Specifications:

DECT Frequency

• 1880-1900 MHz

Range

• Indoor - Up to 165ft (50m)
• Outdoor - Up to 980ft (300m)
• Range Increases by up to 50m or up to 300m Depending on Environment as a Base Station or Repeater is Added

Audio Features

• Narrowband Codecs: G.711 A-law and μ-law, G.726, G.729A, G.729AB
• Wideband Codec: G.722, Opus
• Voice Activity Detection
• Comfort Noise Generation
• DTMF tone generation (RFC2833 and
• SIP INFO)
• Low-Delay Audio Packet Transmission
• Adaptive Jitter Buffers
• Advance Noise Cancellation
• Packet Loss Concealment
• G.165, 168 Echo Cancellation
• Silence Suppression

Telephony Features

• Up to 30 Handsets per Base Station
• Up to 8 Simultaneous Calls per Base Station
• Up to 1000 Handsets per System
• Up to 1000 SIP Registrations per System
• Up to 2000 Simutaneous Calls per System
• Shared Call/ Bridged Line ppearance
• Distinctive Incoming Call Treatment/ Call Waiting
• Call Timer and Call Waiting
• Call Transfer, Hold, Pickup, Call Resume
• Called, Calling, Connected Party Information
• Local or Network based Three-Way Audio Conferencing
• Missed Call Notifications
• Do Not Disturb (DND) Function
• Intercom, Enhanced Call Park
• Caller ID Enable / Disable
• Call Forward on Busy, on no Answer, Unconditional
• Message Waiting Indicator (MWI)
• LED Indicator
• Locate Handset and Handset
• Registration Button
• Monitor Signal Strength of Handsets
• Monitor Battery Life of Handsets
• Out of Voice Band DTMF (RFC 2833)
• Out of Voice Band DTMF (SIP INFO METHOD)
• Call Progress Tone Generation
• Daylight Savings Time Support - Worldwide
• XSi Directory
• XML/LDAP / Remote Phonebook
•  DECT™ Redundancy

VoIP Features

• 10 Service Provider configuration Profile assignments (ITSP Profile A – J)
• Up to 1000 Service Subscription Profile Assignments (SP 1 – 1000)
• SIPv2 (RFC 3261, 3262, 3263,3264)
• SIP over UDP
• SIP over TCP
• SIP over TLS
• SIP Proxy Redundancy - Local or DNS based
• SVR, Primary and Secondary Fallback List
• Maximum Number of Sessions - Independent per Service
• Codec Profile per SIP SP
• Dynamic Audio Payload
• SUBSCRIBE/NOTIFY Framework (RFC 3265)
• NOTIFY Dialog, Line Status
• SUBSCRIBE Message Summary
• VoIP NAT Interworking
• DATA Header Support
• Remote-Party-ID (RPID)
• P-Asserted-Identity (PAID)

Base Station Power

• External Universal AC Adapter (5V 2A DC)
• Power over Ethernet (PoE)

Package Contents

• B4 Base Station
• Stand, Ethernet Cable
• Power Adapter
• Wall Mounting Kit
• Quick Start Guide
• Safety Sheet