Mitel TA 7102 Terminal Adapter

Mitel TA 7102 Terminal Adapter

The Mitel TA 7102 is a security-ready, VoIP terminal adapter, allowing analog phones and fax machines to connect to Mitel communications servers. In addition, the unit can act as a remote gateway with analog end-points via a WAN IP network to a central Mitel communications server.

The Mitel TA 7102 offers security features such as SIP over TLS, SRTP, certificates management, and HTTPS, designed to bring enhanced security for the network management, SIP signaling and media transmission aspects. It interfaces seamlessly with Mitel call servers in secure networks.

Product Overview

The Terminal Adapter Mitel TA 7102 comes with two analog ports. Through the analog ports, the TA 7102 terminal adapters can connect up to two analog phones, modems or faxes. In addition, a PC or home router can be connected to the units second LAN/Ethernet port.

For wide area connection, the terminal adapters use existing broadband access equipment to connect to any standards-based VoIP network. The TA 7102 offers security features, such as SIP over TLS, SRTP, certificates management, and HTTPS, designed to bring enhanced security for the network management, SIP signaling and media transmission aspects. The Mitel TA 7102 units interface seamlessly with the full Mitel communication system portfolio of products in secure networks.

The unit also use innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow PC (or router) connectivity to the second Ethernet port. This is done to have the same public IP address as the first port, eliminating the need for private IP addresses or address translations. The Terminal Adapters support high compression codec’s simultaneously on all analog voice ports, saving valuable bandwidth.

For management purpose, the TA 7102 unites provide a web interface, giving administrator convenient access to the unit for initial setup. The devices can also be auto-provisioned by fetching their encrypted configuration from a TFTP or HTTPS server, making installation secure and transparent to end users.

Voice Processing

• Vocoders: G.711 (A-law, μ-law), G.726, G.729a/b
• G.168 echo cancellation (64 ms)
• DTMF detection and generation
• Carrier tone detection and generation
• Silence detection / suppression and Comfort Noise Generation level software adjustable
• Configurable jitter buffer
• Configurable tones (dial, ringing, busy)
• Configurable transmit packet length
• RTP/RTCP - RFC 1889, RFC 1890, RFC 2833, RFC 3389

Enhanced Telephony Features

• Call Forward / Call Transfer / Conference Call / Call Waiting support
• Inter-digit timer and IP dialing
• Echo Cancellation / Dynamic Jitter Buffer / Voice Activity Detection / Silence Suppression
• Message Waiting Indication via FSK
• Flash hook event signaling
• Caller ID generation (name and number) as per Bellcore DTMF or FSK
• Call Completion (CCNR / CCBS)
• PRACK and UPDATE

Data Features

• PPPoE client – RFC 1332, RFC 1661, RFC 1334, RFC 1994, RFC 2516, RFC 1471, RFC 1472, RFC 1473, RFC 1877
• DHCP server (planned)
• STUN client

Fax and Modem Support

• Group 3 / Super G3 fax real-time FoIP over clear channel (G.711), G.726 or T.38
• T.38 fax relay (9.6 k, 14.4 k)
• G.711 fax and modem bypass
• T.38, fax tone detection and pass-through on G.711 and G.726

Enhanced Security

• HTTPS for web pages and exchange of configuration file
• SRTP with MIKEY, SDES: Supported Cypher, AES – 128 bits
• MIKEY key management protocol (RFC 3830 and RFC 4567)
• SDES key management protocol (RFC 4568)
• X.509 certificate management
• User Access Levels for unit management; Observer; User; Admin, user access rights with the inclusion of flexible policies on the user password configuration

TLS transport method:

• Key Exchange Mechanism: RSA, Diffie-Hellman
• Ciphers (minimum): AES (128 bits), 3DES (168 bits)

IP Telephony Protocol

• SIP – RFC 3261
• MGCP/NCS – RFC 3435
• Multiple Virtual Gateways
• Multiple SIP Proxy support via DNS SRV
• Dual-Stack IPv4/IPv6 support using ANAT (RFC 4091)
• FIPS supported
• Online Certificate Status Protocol (OCSP) revocation status verification for TLS links
• ANAT grouping in the SDP
• SIP signaling and media stream can be on different networks
• The call routing table can be configured with multiple SIP gateways for both sources and destinations

Power

• Universal power adapter included
• 12 V DC, min 700 mA for TA 7102
• 12 V DC, min 1150 mA for TA 7104, TA 7108

Analog Connection

• 2 x RJ-11, analog phone/fax (FXS) interface for TA 7102

Operating Environment

TA7102

• Operating temperature: 0°C to +45°C
• Storage temperature: -40°C to +85°C
• Humidity: up to 85%, non-condensing

Voice Signaling

• On Hold Session Description Protocol (SDP)
• Compliant with MMTEL requirements for 3GPP specification 24.615 for Call Waiting requests