The Burnside T400LR is Burnsides latest Terminal, providing GSM voice communications within coverage of a cellular wireless network. With both GSM and Landline connection, the T400LR provides numerous capabilities including landline backup and least cost routing.
Its excellent affordability, compact size and voice quality, the T400LR is designed to operate in a wide range of installation environments. Up to 5 hours talk time or up to 50 hours standby time is provided by the four NiMH Batteries (Supplied) in the event of mains failure.
T400LR Main Features
SMA Connector for Connecting Supplied High Performance Antenna
Designed for Long Service Life and Product Safety
Programmable Configuration for Regional Tone Compatibility
SMS Reporting of Terminal Status
Relay for Pass-Through from FXO to FXS After Battery Exhaustion
Energy Efficient Design for Low Running Costs
Long Life Battery Technology
Quick and Easy to Install
Built in Battery Backup Using High Quality Panasonic NiMH AA Batteries (Incase of Mains Failure)
Configure by Dial Codes or Remotely by SMS
CLI (Caller Display) Information Presented to a Connected Telephone
Call Progress Announcements (CPA)
Least Cost Routine for Outgoing Calls to Mobiles
Automatic Selection of GSM if Landline Fails
Dual Band - GSM for EU Voice Calls
High Performance, High Quality Configurable Fixed Cellular Terminal
T400LR Technical Specifications
GSM Bands - Dual Band GSM Phase 2/2+ 900/1800 MHz
Speech Communication - Codec for HR, FR, EFR and AMR - EFR & FR Maybe Selected for Telecare Applications
Configuration - May be Programmed by Dial Codes and SMS Commands - Automatic One-Number Dial Various Call Control Options Including Call Duration Limit
In Call Features - Recall (Flash Hook) with Keycodes, Supports Call Waiting, Multi-Party Calls and Explicit Call Transfer
Telephone Interface (FXS) - Connector - RJ11 or BT431A Socket (Depending on Model) Any Type of Corded or Cordless Touch Tone DTMF Phone DC Loop Current 25mA (20mA or 30mA, Selectable) Ringing Signal 25Hz Sinusoidal 43V RMS Choice of Call Progress Tone Cadences Ringing Load 3 REN CLI Sent to Phone with Time and Date - UK, ETSI and Bellcore
PSTN Interface (FXO) - Relay Bypass for Power Failure after Battery Exhaustion, Real Time on Hook Voltage Measurement Off-Hook Voltage and Current Measurement Isolated to 3kV
Indicators - 3 x LED's - Battery Charging, Battery Low, Searching, Pin, Weak Signal, Incoming Call, Call in Progress, Fault
External Antenna Port - Connector - 50 ohm SMA Male
Antenna Supplied - High Performance Compact Hinged
Power - 12VDC Via 2.1mm Barrel Connector , Standby - 0.1W, In Call - 1.9W Average, Supplied AC Adaptor - 100-240VAC - 50-60Hz
Battery Backup - Four NiMH Rechargeable AA Batteries - Over 50 Hours of Standby Time or Up to 5 Hours of Talk Time
All information is provided for reference only. If you are unsure about any of the features listed, please check the manufacturer's official information.